S 25-NR

Bore diameter ( d (mm) )

Width ( B (mm) )

C (mm)

Outer diameter ( D (mm) )

Material

reset

back to list

S 25-NR

S: Spherical plain bearings maintenance required

CAD-Model

You are welcome to look at this series of measurements from all sides with our interactive CAD model.

CAD-Model

Specification

Identification numbers

ARTNR

101945

Measurement

d (mm):

d1 ~ (mm):

29,5

B (mm):

C (mm):

D (mm):

dk (mm):

42,8

Load ratings static C0 (kN):

203

Load ratings dynamic C (kN):

Tilt angle (°):

Weight (kg):

0,39

Product series:

S: Spherical plain bearings maintenance required

Dimension series:

Special version

Bearing:

Plain bearing

Sealing:

Without seal

Maintenance/Friction pairing:

Maintenance required steel/bronze

Material:

Stainless steel

Inner ring: Stainless steel, hardened, ground and polished.

Outer ring: Bronze, outer diameter ground, sliding face made of high-duty bronze. Lubricant is distributed via the lubrication groove in the outer ring.

Outer case: Stainless steel, outer diameter ground. Spherical bearing is pressed into the outer case and secured at both sides against axial movement. However the two outer rings should be axial supported at mounting.

Lubrication: The lubricant enters the lubrication groove through a cross hole in the outer ring.

back to list