S 14-R
S: Spherical plain bearings maintenance required
CAD-Model
You are welcome to look at this series of measurements from all sides with our interactive CAD model.
Specification
Identification numbers

101159

Measurement

14

16,8

19

13,5

34

25,4

74

17

15

0,1

S: Spherical plain bearings maintenance required

Special version

Plain bearing

Without seal

Maintenance required steel/bronze

Inner ring 100Cr6, hard chromium plated at sliding surface, outer case stainless steel

Inner ring: 100Cr6 hard chromium plated at sliding surface, hardened, ground and polished.

Outer ring: Bronze, outer diameter ground, sliding face made of high-duty bronze. Lubricant is distributed via the lubrication groove in the outer ring.

Outer case: Stainless steel, outer diameter ground. Spherical bearing is pressed into the outer case and secured at both sides against axial movement. However the two outer rings should be axial supported at mounting.

Lubrication: The lubricant enters the lubrication groove through a cross hole in the outer ring.