S 20-DR

Bore diameter ( d (mm) )

Width ( B (mm) )

C (mm)

Outer diameter ( D (mm) )

Material

reset

back to list

S 20-DR

S-D: Spherical plain bearings maintenance free

CAD-Model

You are welcome to look at this series of measurements from all sides with our interactive CAD model.

CAD-Model

Specification

Identification numbers

ARTNR

101713

Measurement

d (mm):

d1 ~ (mm):

24,3

B (mm):

C (mm):

D (mm):

dk (mm):

34,9

Load ratings static C0 (kN):

132

Load ratings dynamic C (kN):

Tilt angle (°):

Weight (kg):

0,23

Product series:

S-D: Spherical plain bearings maintenance free

Dimension series:

Special version

Bearing:

Plain bearing

Sealing:

Without seal

Maintenance/Friction pairing:

Maintenance free steel/PTFE

Material:

Inner ring 100Cr6, hard chromium plated at sliding surface, outer case stainless steel

Inner ring: 100Cr6 hard chromium plated at sliding surface, hardened, ground and polished.

Outer ring: Brass lined with an antifriction film, consisting of PTFE, outer diameter ground.

Outer case: Stainless steel, outer diameter ground. Spherical bearing is pressed into the outer case and secured at both sides against axial movement. However the two outer rings should be axial supported at mounting.

back to list