KUI 10-ZZ
KUI-ZZ: Rod ends with ball bearings, female thread
CAD-Model
You are welcome to look at this series of measurements from all sides with our interactive CAD model.
Specification
Identification numbers

104221

Measurement

10

M10

14

10,5

12,4

29

15

19

43

15

57,5

17

1200

3,91

0,94

7

0,075

KUI-ZZ: Rod ends with ball bearings, female thread

Dimension series K

Roller bearing

Covering disc

Low maintenance roller bearing

Female right hand thread

Standard

Balls

Full complement

Inner ring and outer ring: Antifriction bearing steel, hardened, high precision machined.

Housing: Steel with bearing outer ring pressed into housing, raceway precision ground.

Rolling element: Balls made from through-hardened, antifriction bearing steel.

Covering disc: Stainless steel caulked into housing.

Lubrication: The rod ends are given initial lubrication.

Lubrication nipple: DIN 3405

Load ratings: Calculated acc. to DIN ISO 76 and 281.

Maximum permissible speed: This is affected by the bearing load, the bearing clearance, the lubricant and the heat output and input. The maximum permissible speed given in the tables applies for a purely radial load, normal bearing clearance tolerance, no external heat, an operation temperature which is not above the limit, and a low and absolutely shock-free load.

Note: With these rod ends, it is important to ensure that the tilt angle specified in the table is not exceeded, either while mounting or during operation, otherwise the cover washers may be damaged.