KA 20-STK2RS
KA-STK2RS: Rod ends, male thread, maintenance required, sealed
CAD-Model
You are welcome to look at this series of measurements from all sides with our interactive CAD model.
Specification
Identification numbers

101577

Measurement

18

M20x1,5

32

18

24,5

51

78

45

103,5

42

31,5

10

0,46

KA-STK2RS: Rod ends, male thread, maintenance required, sealed

Special version

Plain bearing

2RS-Sealing

Maintenance required steel/bronze

Female right hand thread

Standard

Inner ring: Antifriction bearing steel, hardened, ground, polished.

Bearing shells: Both shells made of heavy-duty bronze have a male thread and are screwed into the housing together with the inner ring, secured with the rubber bellows.

Rubber bellows: Synthetic rubber with vulcanized brass slip ring and steel locknut.  

Housing: tempering steel (standardized), galvanized and chromated.

Bushings: Tempering steel, hardened, bore and outside diameter ground, pressed into the inner ring. They are only used as intake of the brass abrasive rings of the rubber bellows. Due to their low thickness they are not dedicated to transmit radial and axial forces into the spherical bearing.

Lubrication nipple: DIN 3405, Shape D.

Tolerances: To DIN ISO 12440-4, schedule K,  except: d = H8, B = +- 0,3

Note: With these rod ends, it is important to ensure that the tilt angle specified in the table is not exceeded, either while mounting or during operation, otherwise the rubber bellows may be damaged.  

Please note  our terms of use.